Retaining wall (related software)

Software related to retaining wall keyword:

1. CRSI Retaining Wall Program Interactive design of reinforced concrete retaining walls.
   Learn more at BridgeArt.net.
2. Cantilever wall (GEO5) The program is used to verify cantilever wall design. It offers a number of wall shapes and checks reinforced concrete cross-sections. Program is a part of a geotechnical software suite GEO5. It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication.
   Learn more at BridgeArt.net.
3. DeepXcav 2010 DeepXcav is a software for the design of embedded earth retaining walls with limit-equilibrium and advanced nonlinear elasto-plastic analysis methods. DeepXcav offers a one-stop complete geotechnical and structural solution for deep excavation. The software provides a complete database of materials and wall sections (sheet piles, diagraphgm walls, soldier piles, etc.), ground anchors, steel braces (struts) and concrete floor slabs. All design approaches required by Eurocodes 7 and 8 can be automatically generated. Furthermore, user-defined combinations are also possible and can be saved in the database. DeepXcav performs both structural (ACI 318, AISC, EC2 and EC3) and geotechnical checks (anchors pull out resistance, toe embedment, hydraulic heave).
   Learn more at BridgeArt.net.
4. Digital Canal Corporation Software Suite Structural engineering, detailing, and drafting software: VersaFrame - Frame Analysis Retaining Wall Design Footing Design Steel Design Masonry Wall Design Pile Cap Design Timber Design Wind Analysis Concrete Design StructPro - 2D drafting & detailing program for steel and concrete DetailPro - library of over 2500 pre-drawn details is sorted and organized by Construction Specification Institute (CSI) category
   Learn more at BridgeArt.net.
5. GEO5 The GEO5 suite of programs is designed to solve various geotechnical problems from foundation and wall design to stability and settlement analyses. The easy -to -use suite consists of individual programs with a unified user-friendly interface. Each program is used to analyse a different geotechnical task but all modules communicate with each other to form an integrated suite.
   Learn more at BridgeArt.net.
6. GEO5 Abutment The program provides facilities for bridge abutments and wing walls analysis. Abutment program is a part of a geotechnical software suite GEO5. It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication.
   Learn more at BridgeArt.net.
7. GEO5 Earth Pressures The program computes basic earth pressures (active, passive pressure, and pressure at rest) acting upon an arbitrary curved structure. Program is a part of a geotechnical software suite GEO5. It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication.
   Learn more at BridgeArt.net.
8. GEO5 FEM Modelling of various geotechnical problems by the Finite Element Method. The program can model a wide range of geotechnical problems including terrain settlement, sheet piling/diaphragm walls, underpinning of structures, slope stability, beams on foundation, excavation, etc. FEM modules: FEM - Tunnel – Analysis of tunnels by the Finite Element Method FEM - Water Flow – Analysis of steady state water flow in mass body
   Learn more at BridgeArt.net.
9. GEO5 Gravity Wall The program is used to verify gravity wall design. It offers a number of wall shapes and checks mass concrete cross-sections.
   Learn more at BridgeArt.net.
10. GEO5 MSE wall The program MSE Wall is used to verify mechanically stabilized earth walls and segmental retaining walls reinforced by geogrids.
    Learn more at BridgeArt.net.
11. GEO5 Masonry Wall Verification of reinforced masonry walls. Masonry wall program is a part of a geotechnical software suite GEO5. It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication.
    Learn more at BridgeArt.net.
12. GEO5 Nailed Slopes The program analyses nailed walls and slopes of various shapes. Verification analysis can be performed employing EN 1997-1, LRFD or classical approach (limit states, factor of safety).
    Learn more at BridgeArt.net.
13. GEO5 Package Educational Fine offers software only at minimal price to cover program administration and maintenance. The price of 10 seats in the network within Educational licence is 900EUR. This price consists of the HW key and Fine Maintenance program (including latest upgrades, technical and engineering support). Feel free to contact us in case you need more licences or specific solution.
    Learn more at BridgeArt.net.
14. GEO5 Sheeting Check The program is used for the analysis of shallow and deep excavations and retaining structures (anchored, non-anchored cantilever and prop or strut walls) by the method of elastoplastic nonlinear analysis i.e. the magnitude of pressures acting upon a structure depend on its deformation. Program allows the accurate modelling of structural behavior during construction process, determination of the displacement field, the internal forces in the structure and the post-tensioning of anchors.
    Learn more at BridgeArt.net.
15. GEO5 Sheeting Design Sheeting Design – Design and analysis of sheet piles and other retaining wall types. The program is used for design and analysis of variety of retaining structures such as anchored retaining wall and sheet pile retaining wall. It provides required pile embedment lengths (for fixed and hinged toes), bending moments, internal forces and forces in anchors.
    Learn more at BridgeArt.net.
16. GT Strudl Structural Design & Analysis software programs for Architectural - Engineering - Construction (AEC), CAE/CAD, utilities, offshore, industrial, nuclear and civil works facilities. GT STRUDL integrates modeling, analysis, and design into a powerful information processing system. GT STRUDL key features include Linear and Nonlinear Static and Dynamic Analysis, Plastic Hinges, Pushover Analysis, and Buckling Analysis. A wide range of 2D and 3D elements are available including Cable and Base Isolation elements. US and International Steel and Concrete Design Codes. CAD interfaces are available including the ability to import and export CIS/2 files.
    Learn more at BridgeArt.net.
17. LeanWall LeanWall is a software mainly designed for the purpose of designing a concrete or masonry leaning wall. The wall may lean on rock or soil and may retain soil or other granular material. It analyzes the stability of the wall based on the loads and the resulting base pressure, sliding, anchor stresses and eccentricities. Loads applied on the wall may consist of self weight, soil pressure, water pressure, live and seismic loads. If the wall is a reinforced concrete structure, the software also supports the reinforcement design. In addition, a soil pressure calculator is also provided. LeanWall is designed to be an easy application, on-screen trial-and-error method and quick solution finding of the design. A familiar designer can design the wall within minutes. Complete output can be viewed on screen or printed. Operation of the software begins from the initial dimensioning of the wall, earth surface and water levels by clicking on the given dimensions. Next is inputting material properties of the wall, soil, water and reinforcement bars. External loads given consist of live load on the ground surface, seismic load as a horizontal seismic coefficient and any concentrated loads if required. Results of the wall stability can be obtained immediately. To meet a stable wall, rock or ground anchors may be provided. If they are not satisfied then another trial can be made very quickly. Final results can be printed. Using the internal forces of the wall, reinforced concrete design can also be design very quickly. It requires only bar diameters and spacings of the reinforcements. LeanWall supports metric, SI and British unit systems.
    Learn more at BridgeArt.net.
18. MasterKey Retaining Walls Design Design of both reinforced and unreinforced concrete and masonry retaining walls to CP2, BS 8002, BS 8110, IS 325, and BS 5628.
    Learn more at BridgeArt.net.
19. PENNDOT LRFD and Engineering Programs Suite of command line programs for bridge design and analysis, with text input and output files. Includes: ENGASST - Engineering Assistant ABLRFD - LRFD Abutment and Retaining Wall Analysis and Design BPLRFD - LRFD Bearing Pad Design and Analysis BXLRFD - LRFD Box Culvert Design and Rating FBLRFD - LRFD Floorbeam Analysis and Rating PAPIER - Pennsylvania Pier Analysis PSLRFD - LRFD Prestressed Concrete Girder Design and Rating SPLRFD - LRFD Steel Girder Splice Design and Analysis STLRFD - LRFD Steel Girder Design and Rating ABUT5 -Abutment and Retaining Wall ARCH - Arch Analysis and Design BAR7 - Bridge Analysis and Rating BOX5 - Box Culvert Design and Rating BRGEO - Bridge Geometry BSP - Beam Section Properties CAMBR - Field Check of Camber CBA - Continuous Beam Analysis CLLMR - Comparison of Live Load Moments and Reactions GRPRO - Grade Profile HGEO - Horizontal Geometry PS3 - Prestressed Concrete Girder SIGN - Sign Structure Analysis
    Learn more at BridgeArt.net.
20. Piero Gelfi's Software - 9 Programs Free software by Prof. Piero Gelfi developed in cooperation with his students: SIMQKE - generating artificial accelerograms compatible with a given response spectrum. Telaio2D - finite element program for linear and nonlinear seismic analysis of plane frames. Arco - verification of masonry arches and vaults. Armor beam - analysis and design of reinforced concrete beams. Simple beam - analysis of single span beams for various loading conditions. Retaining wall - analysis and design of retaining walls. Continuous beam - analysis of continuous beams. VeaSlu - verification of general sections. Profili - database of structural profiles.
    Learn more at BridgeArt.net.
21. QuickRWall Design of concrete or masonry retaining walls.
    Learn more at BridgeArt.net.
22. Reinforced Concrete Cantilever Wall Program to design and check reinforced cantilever walls for soil retention. An automatic geometric pre-design is carried out as well as the section reinforcement and geometric and reinforcement design of the wall foundation. Allows for the definition of different soil layers, indication of the water table depth, rock layer and any type of loads acting on the exterior and interior. Different construction phases or stages can be defined. The program analyses the global stability of the wall by performing the following checks against overturning and sliding.
    Learn more at BridgeArt.net.
23. RetWall Versatile program for the design and analysis of cantilever or gravity retaining walls with a geotechnical engineering flavor. In addition to the conventional stability checks and structural design, the program provides an estimate of the settlement and rotation of the base, calculates the bearing capacity of the soil based on user-supplied soil parameters, taking into consideration the effects of the wall shape and applied loads. Accounts for the presence of water and easily evaluates seismic conditions. Prepared in accordance with Eurocode and ACI codes.
    Learn more at BridgeArt.net.
24. Retain Pro Analysis and design of retaining wall with nearly any configuration or loading condition. Design of restrained (basement and tieback) walls.
    Learn more at BridgeArt.net.
25. RetainWall RetainWall is a software mainly developed for the purpose of designing a concrete or masonry retaining wall. The wall may retain soil or other granular material. It analyses the stability of the wall based on the loads and resistances, and results in bearing pressure, sliding, overturning and rotational stabilities. Loads applied on the wall may consist of self weight, soil pressure, water pressure, live and seismic loads. Resistances may consist of base friction and cohesion, passive earth pressure, other structures or a shear key. Load and resistance factor design (LRFD) mode can be applied. If the wall is a reinforced concrete structure, the software also supports the reinforcement design. Main features: - Load and resistance factors design (LRFD) capable - Ready to use load and resistance factors combinations from AASHTO 2007, ACI 318-08 and IBC 2006 - Load and resistance factors editor to modify or create new combination - Concrete reinforcement design from ACI 318-08 - Force diagrams (moment, shear and normal) for every combination - Loads, resistances and reactions diagram for every combination - Wall stabilities (bearing, sliding, overturning, rotation) for every combination - Possibilities to choose active or at rest soil pressures - Possibilities to choose elastic (rock) or plastic (soil) bearing pressures - Possibilities to input user's soil pressure coefficients - Reinforcement design for upper stem, lower stem, toe and heel - Unit systems, properties, load and resistance factors, reinforcement design method, and page setup from last editing become the default for new design - Possibilities to add other loads on wall - Provide stability resistances from a shear key, toe passive soil pressure, adjacent structure, anchors or piles - Enable or disable a shear key, water or seismic - Support metric, SI and British unit systems - Easy, clear, quick and simple software operation - Help facilities
    Learn more at BridgeArt.net.
26. RetainX Free retaining wall design software that fully works in a web browser.
    Learn more at BridgeArt.net.
27. Retaining Wall Software Digital Canal's Retaining Wall software designs and checks retaining wall systems, including the wall, footing toe and heel and a footing key if necessary. Retaining Wall can check the capacity of an existing wall (including as "built" bar sizes and spacing) or determine the required dimensions and steel requirements. Walls can be constructed of cast-in-place concrete or masonry and can be cantilevered or supported on the top and bottom (i.e. a basement wall).
    Learn more at BridgeArt.net.
28. WALLAP Comprehensive software for design of retaining walls.
    Learn more at BridgeArt.net.