Pile (related software)
Jump to navigation
Jump to search
Software related to pile keyword:
- ASDIP 4.1 Collection of 16 computer programs that carefully combine the latest building code provisions and proven design and analysis techniques to perform many of the repetitive calculations most commonly encountered in any structural design office. From walls, corbels and footings, to beams, base plates and columns, ASDIP provides the immediate solution to design, analyze and optimize typical daily design tasks. The following programs are included in the suite: concrete beam deflections; cantilever footings; brackets and corbels; concrete deep beams; concrete circular columns; concrete rectangular columns; concrete shear walls; lateral load distribution; masonry walls; beams with web openings; pile foundations; cantilever retaining walls; spread footings; floor vibrations; spread footings; concrete beams; seismic shear walls.
Learn more at BridgeArt.net. - Digital Canal Corporation Software Suite Structural engineering, detailing, and drafting software: VersaFrame - Frame Analysis Retaining Wall Design Footing Design Steel Design Masonry Wall Design Pile Cap Design Timber Design Wind Analysis Concrete Design StructPro - 2D drafting & detailing program for steel and concrete DetailPro - library of over 2500 pre-drawn details is sorted and organized by Construction Specification Institute (CSI) category
Learn more at BridgeArt.net. - FB-MultiPier The FB-MultiPier analysis program is a nonlinear finite element analysis program capable of analyzing multiple bridge pier structures interconnected by bridge spans. The full structure can be subject to a full array AASHTO load types in a static analysis or time varying load functions in a dynamic analysis. Each pier structure is composed of pier columns and cap supported on a pile cap and piles/shafts with nonlinear soil. This analysis program couples nonlinear structural finite element analysis with nonlinear static soil models for axial, lateral and torsional soil behavior to provide a robust system of analysis for coupled bridge pier structures and foundation systems. FB-MultiPier performs the generation of the finite element model internally given the geometric definition of the structure and foundation system as input graphically by the designer. This allows the engineer to work directly with the design parameters and lessens the bookkeeping necessary to create and interpret a model.
Learn more at BridgeArt.net. - GEO5 The GEO5 suite of programs is designed to solve various geotechnical problems from foundation and wall design to stability and settlement analyses. The easy -to -use suite consists of individual programs with a unified user-friendly interface. Each program is used to analyse a different geotechnical task but all modules communicate with each other to form an integrated suite.
Learn more at BridgeArt.net. - GEO5 Micropile The program verifies tubular micropiles (micropiles reinforced by a steel tube). When calculating the micropile bearing capacity, the program checks both the micropile root and shaft.
Learn more at BridgeArt.net. - GEO5 Pile Group Analysis of group of piles (raft foundations, pile cap) analysis of generally loaded pile group using the spring method (FEM) analysis of vertical bearing capacity of pile group using analytical methods analysis of settlement and load-settlement curve
Learn more at BridgeArt.net. - GEO5 Piles This finite element method program provides calculation of the vertical and horizontal bearing capacity of single piles. Piles program is a part of a geotechnical software suite GEO5. This easy to understand and use system comprises individual modules with uniform user environment and mutual communication.
Learn more at BridgeArt.net. - GEO5 Sheeting Design Sheeting Design – Design and analysis of sheet piles and other retaining wall types. The program is used for design and analysis of variety of retaining structures such as anchored retaining wall and sheet pile retaining wall. It provides required pile embedment lengths (for fixed and hinged toes), bending moments, internal forces and forces in anchors.
Learn more at BridgeArt.net. - GT Strudl Structural Design & Analysis software programs for Architectural - Engineering - Construction (AEC), CAE/CAD, utilities, offshore, industrial, nuclear and civil works facilities. GT STRUDL integrates modeling, analysis, and design into a powerful information processing system. GT STRUDL key features include Linear and Nonlinear Static and Dynamic Analysis, Plastic Hinges, Pushover Analysis, and Buckling Analysis. A wide range of 2D and 3D elements are available including Cable and Base Isolation elements. US and International Steel and Concrete Design Codes. CAD interfaces are available including the ability to import and export CIS/2 files.
Learn more at BridgeArt.net. - M Series A collection of the following geotechnical programs: (1) MSheet addresses the design of sheet walls including distortions and stability for various excavation phases. The critical length is also determined. (2) MFoundation will optimise the dimensions of foundations (with piles, on plates) for a variety of loadings. (3) MGeoBase stores the results of soil tests to use the soil parameters and geometric soil layers for further use in MStab, MSettle, MDrill and MSeep. (4) MStab calculates critical shear surfaces within the soil, incorporating calculated settlements. (5) MSettle determines the settlements through creep and soil consolidation following Koppejan or advanced isotaches. Vertical drainage can be modelled. Subsoil water pressure is checked. (6) MDrill calculates the minimal and maximum compression in horizontal pipes, in drilling liquid and drilling equipment. (7) MSeep determines the phreatic surface and the soil pressure by soil groundwater movement. More modules for groundwater calculation (MWell) and pile foundation design (MPile).
Learn more at BridgeArt.net. - MasterSeries Pile Cap Designer Analysis, design, detailing and scheduling of regularly shaped pile caps for 1 to 9 piles.
Learn more at BridgeArt.net. - Pile Group Analysis Spreadsheet to calculate pile forces for piles in regular and irregular pile groups. Can accommodate load eccentricity relative to the pile group center of gravity and multiple loading cases in a single screen.
Learn more at BridgeArt.net. - Sofistik FEA and CAD software for civil and structural engineering modeling, analysis, design, and detailing. SOFiSTiK is one of the most complete FE packages and covers almost all structural engineering disciplines: building, bridges, foundation, tunneling, membranes, lightweight, dynamics. Design code checks can be performed for 18 international codes. FEA suite (SOFiSTiK) includes the following programs: Sofistik Structural Desktop - SSD (main user interface that helps the user control various modules), CADINP (text editor and script language to define parametric input), SOFIPLUS (standard pre-processor based on AutoCAD), ASE (3D finite element analysis), STAR (3D frame analysis), SlabDesigner PRO (analysis of slabs, walls, frames and grillages), TALPA (linear and nonlinear plain strain/stress analysis), HASE (soil-structure interaction), PFAHL (analysis of pile foundations), HYDRA (analysis of potential problems), PHYSICA (multiphysical code for computation fluid dynamics that can be used for dynamic wind analysis of bridges and buildings). CAD Suite (SOFiCAD) includes the following programs: SOFiCAD DETAILING (tools for construction and formwork planning), SOFICAD REINFORCEMENT (used to generate reinforcement drawings within AutoCAD), SOFiCAD BAMTEC (detailing of reinforcement mats), SOFiCAD ALIGNMENT (horizontal and vertical alignment of highway structures and bridges), SOFiCAD STEELWORK (steel detailing), SOFiCAD DATA-EXCHANGE.
Learn more at BridgeArt.net. - VBent VBent assists the bridge engineer in simplifying the design of non-integral or integral piers or bents. Features include: All components (pier caps, columns, and footings) are intuitively described using bridge terminology. The graphical interface provides real-time modeling feedback without the need for panel input. Unlimited design points throughout the entire substructure are analyzed simultaneously utilizing AASHTO LRFD or LFD specifications.
Learn more at BridgeArt.net. - Wutec Geotechnical Software Geotechnical earthquake engineering and soil dynamics software for 2D static and dynamic finite element analysis of soil-structure interaction; time-history analysis of soil liquefaction and ground displacements induced by earthquakes; numerical analysis of earth dams and retaining walls; 3D dynamic analysis of pile foundations and large diameter drilled shafts; dynamic analysis of loose sands to blast loads; computing pore water pressure dissipation, soil consolidation and ground settlements, and more. The individual products include: Versat 2D - static 2D plane-strain finite element analysis of stresses, deformations and soil structure interactions; dynamic 2D plain-strain finite element analysis of earth structure subjected to dynamic loads from earth quakes, machine vibration, waves or ice actions. Versat 3D - finite element program for quasi-3D nonlinear dynamic analysis of single piles and pile groups in frequency and time domains. Geo-Computing Library - collection of various geotechnical programs to perform calculations directly within your browser.
Learn more at BridgeArt.net.
| Home > Topics > Pile e | |
| Overview | Pile · Pile Software |