Masonry (related software)

Masonry

Overview
Related Software

Software related to masonry keyword:

1. AmQuake The program assist engineers to design safe masonry buildings in the seismic regions of Europe. This development was initiated by the introduction of Eurocode 2, 6 and 8 in Europe. These standards have become mandatory in the European Union starting from March 2010, and they enforce strong rules for masonry buildings in seismic regions. AmQuake is using pushover analysis and the equivalent frame method to check the seismic safety of masonry buildings in a graphical user friendly environment.
   Learn more at BridgeArt.net.
2. Archie-M Archie-M is a Windows program (Windows NT/2000 and XP) designed to help with the analysis of masonry bridges and viaducts. It is based on the principle of the thrust line, but goes rather farther than that. It can be used as part of the assessment or design process. Archie-M provides rapid, interactive equilibrium analysis of arching structures. The program is a result of nearly 20 years of research and consultancy. Archie-M uses the zone of thrust to define the minimum structure necessary to support a given set of loads. Graphical and numerical results are updated continuously as loads are moved across the structure by hand or automatically. The engineer is able to explore the potential for different load paths to transmit loads to the foundations.
   Learn more at BridgeArt.net.
3. Cross Section Analysis And Design Cross Section Analysis And Design is a powerful application that can perform a wide range of cross section calculations, including the design of reinforced concrete sections. The given cross sections are built up of one or more geometric entities and can be drawn directly using the versatile featured user interface. The user can also import standard steel sections from a complete shape library according to all major codes (AISC, Australian-New Zealand, BS, Chinese, European, Indian, Aluminum etc.) There are no limitations regarding the shape, materials or loads of a section, since the program can handle any arbitrary cross section under biaxial bending and axial loads. Among its capabilities, Cross Section Analysis And Design can calculate all sectional properties, plot Moment – Curvature and Interaction diagrams, estimate the location of neutral axis under given sets of biaxial loads and plot the corresponding stress – strain diagrams as well as the resulting stress contours. The last-named items can also be calculated by providing the location of the neutral axis plane on the section. Moreover, the program fully complies with all major codes concerning reinforced concrete sections (AASHTO, UBC, AS 3600, IS 456, ACI 318, BS 8110, CSA A233, EC2, NZS 3101 and CP 65). The user can also perform a reinforcement design according to above listed codes, plot the matching interaction diagrams etc., or even check a given reinforcement amount for the specified load cases. The stress – strain curve of concrete, reinforcement and other materials is specified as per the defined Analysis Parameters Sets. Thus calculations can be performed for many design situations, such as Ultimate/Serviceability or custom defined Limit States, with an automatic adjustment of the material properties, safety factors etc. A large material library is also available according to almost all concrete/reinforcement material specifications. Apart from concrete and reinforcement materials, the user can specify custom linear, bilinear, trilinear parabolic or fully general materials.
   Learn more at BridgeArt.net.
4. Digital Canal Corporation Software Suite Structural engineering, detailing, and drafting software: VersaFrame - Frame Analysis Retaining Wall Design Footing Design Steel Design Masonry Wall Design Pile Cap Design Timber Design Wind Analysis Concrete Design StructPro - 2D drafting & detailing program for steel and concrete DetailPro - library of over 2500 pre-drawn details is sorted and organized by Construction Specification Institute (CSI) category
   Learn more at BridgeArt.net.
5. EdiLus Structural design and analysis for buildings.
   Learn more at BridgeArt.net.
6. Excel Spreadsheet by Techno Consultants, Ltd. Collection of MS Excel spreadsheet templates for structural analysis, steel design, reinforced concrete design and masonry design. Most spreadsheets incorporate British codes. Includes (1) structural analysis - distribution of pile loads on piles below rigid pilecaps, continuous beam analysis up to 4 spans; (2) reinforced concrete design - RC section design, RC rectangular column design, RC circular column design; (3) steel design - design of steel members, welds, and bolt groups; (4) masonry design - design of masonry panels for lateral loads.
   Learn more at BridgeArt.net.
7. MasterKey Masonry Design Design of reinforced and unreinforced masonry walls and columns to IS 325 and BS 5628.
   Learn more at BridgeArt.net.
8. POR 2000 Software for the non-linear analysis of masonry structures subject to seismic and non-seismic actions, according to italian design code DM 14/09/2005 "Testo Unitario per la Normativa Tecnica sulle Costruzioni". It allows the controls foreseen by the regulations in force for the evaluation of static safety and for the definition of strengthening work.
   Learn more at BridgeArt.net.
9. QuickMasonry Design and checking of a variety of masonry components used in buildings.
   Learn more at BridgeArt.net.
10. RING Masonry arch bridge analysis software.
    Learn more at BridgeArt.net.
11. RetainWall RetainWall is a software mainly developed for the purpose of designing a concrete or masonry retaining wall. The wall may retain soil or other granular material. It analyses the stability of the wall based on the loads and resistances, and results in bearing pressure, sliding, overturning and rotational stabilities. Loads applied on the wall may consist of self weight, soil pressure, water pressure, live and seismic loads. Resistances may consist of base friction and cohesion, passive earth pressure, other structures or a shear key. Load and resistance factor design (LRFD) mode can be applied. If the wall is a reinforced concrete structure, the software also supports the reinforcement design. Main features: - Load and resistance factors design (LRFD) capable - Ready to use load and resistance factors combinations from AASHTO 2007, ACI 318-08 and IBC 2006 - Load and resistance factors editor to modify or create new combination - Concrete reinforcement design from ACI 318-08 - Force diagrams (moment, shear and normal) for every combination - Loads, resistances and reactions diagram for every combination - Wall stabilities (bearing, sliding, overturning, rotation) for every combination - Possibilities to choose active or at rest soil pressures - Possibilities to choose elastic (rock) or plastic (soil) bearing pressures - Possibilities to input user's soil pressure coefficients - Reinforcement design for upper stem, lower stem, toe and heel - Unit systems, properties, load and resistance factors, reinforcement design method, and page setup from last editing become the default for new design - Possibilities to add other loads on wall - Provide stability resistances from a shear key, toe passive soil pressure, adjacent structure, anchors or piles - Enable or disable a shear key, water or seismic - Support metric, SI and British unit systems - Easy, clear, quick and simple software operation - Help facilities
    Learn more at BridgeArt.net.