Bridge (related software)

Software related to bridge keyword:

1. AASHTOWare Family of software products developed, maintained and enhanced by AASHTO (American Association of State Highway Transportation Officials) and their affiliates under the Cooperative Computer Software Development activity. These products then available for license to AASHTO member departments, educational institutions, and other private and public agencies. The software suite includes: (1) AASHTO Trns*port - management of pre-construction and construction contract information; (2) Pontis - comprehensive bridge management system; (3) Virtis - bridge load rating; (4) Opis - bridge design; (5) DARWin - pavement analysis and design system; (6) SDMS - survey data management system; (7) TSIMS - transportation safety management system.
   Learn more at BridgeArt.net.
2. ADAPT-ABI Special-purpose program for the design and analysis of prestressed concrete bridges built either segmentally or conventionally. It provides information for geometry and stress control during construction, as well as design values for service load.
   Learn more at BridgeArt.net.
3. ASTRA Pro Bridge design software
   Learn more at BridgeArt.net.
4. Allplan Nemetschek Allplan provides object-oriented planning and design software for architects and engineers. It enables users to create architectural and structure models, as well as obtain information on quantities and costs throughout all project phases. What makes this software special is that you can switch between 2D drafting and 3D modeling depending on the project phase or type. In this way, you can combine the best of both worlds and use the approach that suits you best at any time.
   Learn more at BridgeArt.net.
5. Archie-M Archie-M is a Windows program (Windows NT/2000 and XP) designed to help with the analysis of masonry bridges and viaducts. It is based on the principle of the thrust line, but goes rather farther than that. It can be used as part of the assessment or design process. Archie-M provides rapid, interactive equilibrium analysis of arching structures. The program is a result of nearly 20 years of research and consultancy. Archie-M uses the zone of thrust to define the minimum structure necessary to support a given set of loads. Graphical and numerical results are updated continuously as loads are moved across the structure by hand or automatically. The engineer is able to explore the potential for different load paths to transmit loads to the foundations.
   Learn more at BridgeArt.net.
6. BASSIN Legacy software from 1983 to compute three-dimensional dynamic response of an arbitrarily configured, elastic, bridge/abutment/backfill system. Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley. BASSIN: Dynamic Analysis of Bridge/Abutment/Backfill Systems Subjected to Traveling Seismic Waves Dendrou, Basile Agbabian Associates, El Segundo, California, 1983, The BASSIN methodology has the following features: It computes the three-dimensional dynamic response of an arbitrarily configured, elastic, bridge/abutment/backfill system. It assumes this system to be underlain by a soil continuum that is represented as an elastic half- space. It represents seismic input motions as being harmonic and induced by planar P-, SV-, SH-, or Rayleigh waves with arbitrary wavelength, amplitude, and direction of incidence. The methodology uses a substructure approach in which the structure (which comprises the bridge, abutment, and backfill) is represented using a three-dimensional finite element model, and the underlying soil continuum is represented using a boundary element approach. The finite element model defines the stiffness matrix, mass matrix, and fixed-base nodes for the structure. The boundary element approach characterizes the underlying soil medium using frequency- dependent impedance matrices and driving force vectors that also incorporate the free-field wave motions. Compatibility and equilibrium requirements at the soil/structure interface are used to couple these substructures. The steady-state response of the soil/structure system is then computed.
   Learn more at BridgeArt.net.
7. BRASS Suite Suite of programs for Bridge Rating and Analysis of Structural Systems known as BRASS includes the following programs: BRASS-GIRDER, BRASS-GIRDER(LRFD) - systems for the analysis and rating of highway bridge girders; BRASS-PIER, BRASS-PIER(LRFD) - analysis and design of reinforced concrete bridge piers; BRASS-CULVERT - analysis and design of reinforced concrete box culverts; BRASS-POLE - analysis of cantilever sign, luminaire and signal support structures; BRASS-SPLICE - design of field splices for rolled beam or welded plate steel girders; BRASS-TRUSS - analysis and load rating of simple or continuous truss or girder bridges; BRASS-PAD - design and analysis of elastomeric bridge bearings; BRASS-DIST - calculates wheel load distribution factors.
   Learn more at BridgeArt.net.
8. BSDI Program for grid analysis of steel bridges.
   Learn more at BridgeArt.net.
9. BridgeLCC Life-cycle costing software for preliminary bridge design.
   Learn more at BridgeArt.net.
10. CELL4 Legacy software from 1985 which based upon the finite element method and is particularly suited for the analysis of post-tensioned box girder bridges of constant depth which have arbitrary plan geometry and support conditions. Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley. CELL4: Elastic Finite Element Analysis of Prestressed Cellular Structures of Arbitrary Plan Geometry and Constant Depth Chan, Esmond C.-Y.; Scordelis, Alex C. Department of Civil Engineering, University of California, Berkeley, 1985, CELL4 is a program based upon the finite element method and is particularly suited for the analysis of post-tensioned box girder bridges of constant depth which have arbitrary plan geometry and support conditions. The bridge can be straight, curved, or quadrilateral in plan. The longitudinal interior webs must be vertical, but the longitudinal exterior webs can be vertical, sloping, or curved. Transverse diaphragms can be modelled by vertical web elements or by special web elements in regions with sloping or curved webs. The top and bottom deck slabs as well as the interior and the exterior webs may be prestressed. Boundary conditions at any nodal point are arbitrary, allowing rigid supports as well as translational and rotational elastic supports, oriented in any arbitrary direction to simulate the stiffness of the supporting columns and bents. For prestressing analysis an automatic input has been provided to define the geometry of the two types of post-tensioned unbonded tendons which can be used. Each panel or slab tendon can be stressed either from one end or both ends, and losses due to friction and anchorage slip are accounted for. In order to facilitate the interpretation of output, an automatic integration of internal forces to give individual girder and total sectional force resultants is incorporated. This permits a better understanding of the load carrying mechanism in a complex bridge system, and can also be used to carry out equilibrium checks easily.
    Learn more at BridgeArt.net.
11. CSiBridge Program for modeling, analysis and design of bridge structures.
    Learn more at BridgeArt.net.
12. Concise Beam Concise Beam is an easy to use Microsoft Windows based program for the design of precast concrete beams. Concise Beam will perform a load analysis and design checks in accordance with the latest edition of ACI 318, CSA A23.3 or AS3600. CSA S6 is also supported without moving loads. Key code parameters can be customized to simulate other design codes. The beam can be conventionally reinforced and pretensioned. It can model any cross-sectional shape and will allow the cross-section to vary prismatically (step-wise) over the length of the beam. A graphical editor allows the user to describe any cross-section, including voids, openings or cut-outs. Concise Beam currently works in two-dimensions but will also account for torsion along the beam. The user can work in metric or Imperial (US Customary) units, select from a variety of individual units (i.e. mm, cm, m), and switch back and forth at will. Libraries of industry standard cross-sections and materials are provided with Concise Beam. The standard libraries can be modified, extended and customized by the user.
    Learn more at BridgeArt.net.
13. Conspan Analysis and design of simple-span and multi-span precast and prestressed bridge beams.
    Learn more at BridgeArt.net.
14. Cross Section Analysis And Design Cross Section Analysis And Design is a powerful application that can perform a wide range of cross section calculations, including the design of reinforced concrete sections. The given cross sections are built up of one or more geometric entities and can be drawn directly using the versatile featured user interface. The user can also import standard steel sections from a complete shape library according to all major codes (AISC, Australian-New Zealand, BS, Chinese, European, Indian, Aluminum etc.) There are no limitations regarding the shape, materials or loads of a section, since the program can handle any arbitrary cross section under biaxial bending and axial loads. Among its capabilities, Cross Section Analysis And Design can calculate all sectional properties, plot Moment – Curvature and Interaction diagrams, estimate the location of neutral axis under given sets of biaxial loads and plot the corresponding stress – strain diagrams as well as the resulting stress contours. The last-named items can also be calculated by providing the location of the neutral axis plane on the section. Moreover, the program fully complies with all major codes concerning reinforced concrete sections (AASHTO, UBC, AS 3600, IS 456, ACI 318, BS 8110, CSA A233, EC2, NZS 3101 and CP 65). The user can also perform a reinforcement design according to above listed codes, plot the matching interaction diagrams etc., or even check a given reinforcement amount for the specified load cases. The stress – strain curve of concrete, reinforcement and other materials is specified as per the defined Analysis Parameters Sets. Thus calculations can be performed for many design situations, such as Ultimate/Serviceability or custom defined Limit States, with an automatic adjustment of the material properties, safety factors etc. A large material library is also available according to almost all concrete/reinforcement material specifications. Apart from concrete and reinforcement materials, the user can specify custom linear, bilinear, trilinear parabolic or fully general materials.
    Learn more at BridgeArt.net.
15. DESCUS I Design and analysis of curved I-girder bridges.
    Learn more at BridgeArt.net.
16. FB-MultiPier The FB-MultiPier analysis program is a nonlinear finite element analysis program capable of analyzing multiple bridge pier structures interconnected by bridge spans. The full structure can be subject to a full array AASHTO load types in a static analysis or time varying load functions in a dynamic analysis. Each pier structure is composed of pier columns and cap supported on a pile cap and piles/shafts with nonlinear soil. This analysis program couples nonlinear structural finite element analysis with nonlinear static soil models for axial, lateral and torsional soil behavior to provide a robust system of analysis for coupled bridge pier structures and foundation systems. FB-MultiPier performs the generation of the finite element model internally given the geometric definition of the structure and foundation system as input graphically by the designer. This allows the engineer to work directly with the design parameters and lessens the bookkeeping necessary to create and interpret a model.
    Learn more at BridgeArt.net.
17. GT Strudl Structural Design & Analysis software programs for Architectural - Engineering - Construction (AEC), CAE/CAD, utilities, offshore, industrial, nuclear and civil works facilities. GT STRUDL integrates modeling, analysis, and design into a powerful information processing system. GT STRUDL key features include Linear and Nonlinear Static and Dynamic Analysis, Plastic Hinges, Pushover Analysis, and Buckling Analysis. A wide range of 2D and 3D elements are available including Cable and Base Isolation elements. US and International Steel and Concrete Design Codes. CAD interfaces are available including the ability to import and export CIS/2 files.
    Learn more at BridgeArt.net.
18. ISADAB Legacy software from 1986 for the transverse inelastic analysis of reinforced concrete highway bridges. Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley. ISADAB: Inelastic Static and Dynamic Analysis of Bridges Saiidi, Mehdi; Lawver, Renee A.; Hart, James D. Civil Engineering Department, University of Nevada, Reno, Nevada, 1986, ISADAB was developed for the transverse inelastic analysis of reinforced concrete highway bridges. The following tasks can be carried out by the program: (a) static analysis, (b) free-vibration analysis for initial displacements caused by static loads, (c) frequency analysis based on instantaneous stiffness during static loading, and (d) earthquake response analysis. The nonlinear effects are accounted for by incorporating translational and rotational springs at abutments, pier foundations, and at the base of piers. The deck and piers are treated as line elements. Two hysteresis models are used to represent the cyclic behavior of the nonlinear components: the Ramberg-Osgood model (for abutment springs) and the TQ-Hyst model (for pier and foundation springs), which operates on a tri-linear primary curve.
    Learn more at BridgeArt.net.
19. LAPBOX Legacy software from 1986 for the analysis of curved nonprismatic reinforced and prestressed concrete box girder bridges. Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley. LAPBOX: Linear Elastic Analysis of Box Girder Bridges Choudhury, Deepak Department of Civil Engineering, University of California, Berkeley, 1986, LAPBOX is an implementation of a numerical procedure for the analysis of curved nonprismatic reinforced and prestressed concrete box girder bridges. Thin-walled beam theory and the finite element method are combined to develop a curved nonprismatic thin-walled box beam element. The cross section of the element is a rectangular single-cell box with side cantilevers. The axis of the element is curved in plan. The cross sectional dimensions vary along the element axis. Eight displacement degrees of freedom, including transverse distortion and longitudinal warping of the cross section are considered at each of the three element nodes. Small displacements and small strains are assumed in the element formulation. Prestressing, consisting of post-tensioned bonded tendons in the longitudinal direction, is considered. The tendons are idealized as straight prestressing steel segments between nodes of the box beam elements. Friction and anchorage slip losses are considered.
    Learn more at BridgeArt.net.
20. LARSA Finite-element-based analysis and design software for structural and earthquake engineering.
    Learn more at BridgeArt.net.
21. MDX Design and rating of curved and straight steel bridges for compliance with AASHTO specifications.
    Learn more at BridgeArt.net.
22. Midas/Civil Integrated Solution System for Civil Structural Engineering. Features: unlimited number of nodes, elements and load combinations; construction sequence analysis; time dependent material properties to simulate creep and shrinkage; suspension and cable-stayed bridge analyses; moving load analysis; geometric non-linear analysis; heat of hydratation analysis.
    Learn more at BridgeArt.net.
23. PGSuper Precast-Prestressed Girder design and analysis software.
    Learn more at BridgeArt.net.
24. PLATE Finite element program for plate structures with special features for bridge engineering.
    Learn more at BridgeArt.net.
25. PSBeam Design of precast, prestressed concrete bridge girders.
    Learn more at BridgeArt.net.
26. Pro/Bridge Geometry Pro/Bridge-Geometry is a versatile bridge modeling system that enables engineers to use the basic geometric parameters of road surface and bridge components to capture the complete 3-D geometry of a simple or very complex bridge site. The system provides solutions to complex geometric problems that are difficult to do by hand, time consuming and tedious in nature. Such problems are often prone to errors that could lead to serious cost overrun and legal liability issues. It removes the geometric limitations in the design process and allows exploring better solutions to complex bridges. Starting from the digital terrain data, basic alignment and road data, the user can dynamically manipulate the basic parameters that control the layout and proportioning of bridge elements. The effect of any parameter change is propagated into the complete 3-D model and instantly updates screen views as well as all tabular and graphic reports. The system accounts for the variety of bridge types and component shapes. The system generates tabular reports such as screed elevation table and graphic reports as well as drawings such as abutment, piers, footing layout, girder layout, etc. Output can be viewed, printed and/or exported to packages such as AutoCad or Excel to finalize the generation of contract documents. The system is not a bridge analysis or design program nor is it intended as a replacement of CAD packages such as AutoCAD.
    Learn more at BridgeArt.net.
27. QConBridge Live load analysis program for continuous bridge frames.
    Learn more at BridgeArt.net.
28. RM2006 4D static and dynamic design and analysis of concrete, steel and composite structure. Can be used to investigate any bridge type and erection sequence. Incorporates 14 international design codes.
    Learn more at BridgeArt.net.
29. RiverCAD RiverCAD is a sophisticated river modeling software than can be used for evaluation of bridge scour. The software was developed in cooperation with several major engineering companies involved in FHWA and DOT bridge replacement contracts to completely automate the FHWA HEC 18 bridge scour calculations and analysis, design, and reporting necessary for bridge replacement and armoring projects. RiverCAD will analyze a bridge for scour and create a "ready-to-submit" FHWA-accepted bridge scour engineering report in just minutes. The scour report includes all input data, equations, variables, intermediate results, final analysis results, and analysis narrative - along with placing the computed scour results directly on the bridge within the AutoCAD drawing. RiverCAD's bridge scour calculations and analysis can account for: * Contraction scour * Pier scour * Bridge abutment scour * Bridge skew * Pier skew * Pier shape * Sloping and skewed abutments * Soil bed material * Armoring of bridge abutments * Armoring of bridge piers * US, metric, or mixed unit-based input data
    Learn more at BridgeArt.net.
30. Robot Millenium Single solution for the structural engineer incorporating frames, finite elements and design in mixed materials with advanced solution possibilities into an intuitive native Windows interface.
    Learn more at BridgeArt.net.
31. SAM Integrated Bridge Design Software Specialized bridge design software for medium span bridges that integrates code checking with analysis. Contains modules for section properties, differential temperature analysis of any section, design and assess of concrete sections, torsion and shear calculations for any section, and thermal cracking of concrete sections.
    Learn more at BridgeArt.net.
32. SAP2000 Integrated software for structural analysis and design.
    Learn more at BridgeArt.net.
33. STAAD STAAD is structural engineering software for 3D model generation, analysis and multi-material design. Capabilities for static, dynamic, or pushover analysis of bridges, containment structures, embedded structures (tunnels and culverts), pipe racks, steel, concrete, aluminum or timber buildings, transmission towers, stadiums or any other simple or complex structure. Contains the following modules: STAAD.Pro STAAD.beava - Bridge Engineering Automated Vehicle Application STAAD.beam - design of composite, noncomposite and partially composite steel beams STAAD.foundation - design of isolated footings, combined footings, strip footings, pile caps and mat foundations. STAAD.offshore - design of offshore structures OpenSTAAD - library of functions that can be accessed via the COM (Component Object Model) interface
    Learn more at BridgeArt.net.
34. STLBRIDGE Continuous Steel Bridge Design
    Learn more at BridgeArt.net.
35. Scia Engineer Scia Engineer analyses, designs and details any type of structure. From the simplest to the most complex construction in concrete, steel, aluminium, plastic, timber or mixed, with integration of the local and international codes and with a link between the analysis and drawing components.
    Learn more at BridgeArt.net.
36. Slab Bridge Designer Design of cast-in-place steel reinforced concrete slabs according to AASHTO LFD and LRFD.
    Learn more at BridgeArt.net.
37. Sofistik FEA and CAD software for civil and structural engineering modeling, analysis, design, and detailing. SOFiSTiK is one of the most complete FE packages and covers almost all structural engineering disciplines: building, bridges, foundation, tunneling, membranes, lightweight, dynamics. Design code checks can be performed for 18 international codes. FEA suite (SOFiSTiK) includes the following programs: Sofistik Structural Desktop - SSD (main user interface that helps the user control various modules), CADINP (text editor and script language to define parametric input), SOFIPLUS (standard pre-processor based on AutoCAD), ASE (3D finite element analysis), STAR (3D frame analysis), SlabDesigner PRO (analysis of slabs, walls, frames and grillages), TALPA (linear and nonlinear plain strain/stress analysis), HASE (soil-structure interaction), PFAHL (analysis of pile foundations), HYDRA (analysis of potential problems), PHYSICA (multiphysical code for computation fluid dynamics that can be used for dynamic wind analysis of bridges and buildings). CAD Suite (SOFiCAD) includes the following programs: SOFiCAD DETAILING (tools for construction and formwork planning), SOFICAD REINFORCEMENT (used to generate reinforcement drawings within AutoCAD), SOFiCAD BAMTEC (detailing of reinforcement mats), SOFiCAD ALIGNMENT (horizontal and vertical alignment of highway structures and bridges), SOFiCAD STEELWORK (steel detailing), SOFiCAD DATA-EXCHANGE.
    Learn more at BridgeArt.net.
38. Tango Program for the analysis of bridges that takes into account the actual procedure of bridge construction. Tango can analyze the following types of bridges: (1) steel bridges; (2) concrete post-tensioned segmental bridges; (3) concrete composite bridges - precast girders with cast-in-place deck; (4) steel/concrete composite bridges; (5) cable-stayed bridges. Tango can analyze the following construction sequences: (1) cantilever construction - cast-in-place or precast; (2) incremental launching; (3) cable-stayed; (4) span-by-span erection; (5) precast girder and deck as composite. Developed by Dr. Man-Chung Tang, who pioneered in many sound and innovative techniques in the design and construction of bridges.
    Learn more at BridgeArt.net.
39. UTrAp UTrAp is a software package developed for pour sequence analysis of curved, trapezoidal steel box girders. Single and dual girder systems with a constant radius of curvature can be analyzed with this program. The software consists of a Graphical User Interface (GUI) and an analysis module. The analysis module relies on the finite element method to compute the response of a three-dimensional bridge structure. Input data is supplied to the program through use of a GUI. The program can handle multiple analysis cases and has graphics capability to visualize the output. It also offers the capability of performing an eignevalue buckling analysis, and it allows for exporting results to Excel.
    Learn more at BridgeArt.net.
40. V Slab AASHTO LRFD Variable Depth Slab Bridge Design & LRFR Load Rating
    Learn more at BridgeArt.net.
41. VBent VBent assists the bridge engineer in simplifying the design of non-integral or integral piers or bents. Features include: All components (pier caps, columns, and footings) are intuitively described using bridge terminology. The graphical interface provides real-time modeling feedback without the need for panel input. Unlimited design points throughout the entire substructure are analyzed simultaneously utilizing AASHTO LRFD or LFD specifications.
    Learn more at BridgeArt.net.
42. VBridge VBridge is a superstructure software tool for the complete design of cast-in-place concrete superstructures. VBridge capabilities include: P-Jack design for post-tensioned prestressed concrete box girder and slab bridges Reinforced concrete flexure and shear design for cast-in-place bridges Bridge description and finite element model support curves, skewed supports, and multiple column bents Live, dead, temperature, and user loads for any concrete girder bridge configuration (integral or non-integral) and support types (continuous and simply supported) Can use (import) CTBridge input files Shares geometric and load data with VBent for the creation of substructure models
    Learn more at BridgeArt.net.
43. Virtis Bridge load rating program.
    Learn more at BridgeArt.net.
44. WBLF (Washington Bridge Foundation Libraries) Programmable software components that can be used in spreadsheets and MathCAD documents. Reusable C++ libraries for bridge engineering applications.
    Learn more at BridgeArt.net.