SoftwareCategory:Software Suite

Software Categories > Software Suite

• AASHTOWare - Family of software products developed, maintained and enhanced by AASHTO (American Association of State Highway Transportation Officials) and their affiliates under the Cooperative Computer Software Development activity. These products then available for license to AASHTO member departments, educational institutions, and other private and public agencies. The software suite includes: (1) AASHTO Trns*port - management of pre-construction and construction contract information; (2) Pontis - comprehensive bridge management system; (3) Virtis - bridge load rating; (4) Opis - bridge design; (5) DARWin - pavement analysis and design system; (6) SDMS - survey data management system; (7) TSIMS - transportation safety management system.
• CivilTech Engineering Software Suite - Suite of software focused mainly on geotechnical analysis. (1) AllPile - pile vertical, lateral, group, settlement, and negative friction analysis. (2) SuperLog - Boring, test pit, and well drawing/reporting. (3) Shoring Suite - shoring wall design and analysis. (4) Liquefy Pro - earthquake-induced liquefaction and settlement analysis. (5) EarthPres - earth pressure analysis (active and passive pressure). (6) Surcharge - lateral pressure due to surcharge load. (7) Upres - underground pipe and tunnel analysis. (8) Visual Lab - geotechnical lab testing (compaction, grain size, and consolidation). (9) Spectra - graphical presentation for seismic spectra. (10) Heave - stability analysis for vertical cut.
• Digital Canal Corporation Software Suite - Structural engineering, detailing, and drafting software: (1) VersaFrame - Frame Analysis; (2) Retaining Wall Design; (3) Footing Design; (4) Steel Design; (5) Masonry Wall Design; (6) Pile Cap Design; (7) Timber Design; (8) Wind Analysis; (9) Concrete Design; (10) StructPro - 2D drafting & detailing program for steel and concrete; (11) DetailPro - library of over 2500 pre-drawn details is sorted and organized by Construction Specification Institute (CSI) category.
• Dlubal Software - Suite of programs for structural engineering.

  Frame analysis package includes basic program (RSTAB, RSTAB 2D), steel structures add-ons (STEEL, KAPPA, LTB, FE-LTB, EL-PL, PLATE-BUCKLING, ASD), concrete add-ons (CONCRETE), timber structures add-ons (TIMBER), composite add-ons (COMPOSITE-BEAM), dynamics add-on (DYNAM Basic, DYNAM Addition I, DYNAM Addition II) and other add-ons (DEFORM, RSMOVE, RSIMP, RSBUCK, RSBOMBI, SUPER-LC, RS-COM).

  Finite element analysis package includes basic program (RFEM, RFEM 2D), steel structures add-ons (RF-STEEL, RF-LTB), concrete structures add-ons (RF-CONCRETE, RF-CONCRETE 2D, RF-CONCRETE ONORM, RF-PUNCH), timber structures add-on (RF-TIMBER Members), dynamics add-ons (RF-DYNAM Basic), and other add-ons (RF-STABILITY, RF-IMP, RF-IMP, RF-COM, RF-COMBI).

  Cross sections modules enable to determine cross-section values and general cross-section analyses for both thin-walled and thick-walled sections (SHAPE-THIN).

  Connections modules perform static analyses for various types of connections for steel structures (FRAME-JOINT), END-PLATE, CONNECT, DSTV) and timber structures (DOWEL).
• ESOP - ESOP is software developed for Component Design and Analysis based in MS Excel with over 150 modules for various types of tasks, such as steel connections (various types) to British and US standards, section property calculations, steel design, fire calculations, wave loader, offshore design modules, castellated beam sections, finite elements, plates, membranes, auto mesh generator, apply loads, instant update of results, etc.

  ESOP works on many levels: (1) As a workbook of standard modules that the user may access for carrying out everyday analysis and design work; (2) As a program that the engineer can use to write his own programs; (3) As a program that can automatically communicate bi-directionally with ROBOT Millennium, thereby facilitating the ability for the user to write their own pre and post processors for ROBOT - examples include connection design, wave loading etc.

  The communication with ROBOT Millennium or other software may take the following forms: (1) Calculation modules will automatically capture the data from ROBOT Millennium (e.g. data concerning geometry, materials, sections, loads, internal forces, ...); (2) The modules may function as generators of completed models for ROBOT Millennium (e.g. generator of frames with the elements of variable section, combinations generator, generator of typical solutions of static models, ...); (3) The modules may extend the possibilities of results analysis of ROBOT Millennium (e.g. new types of results set-ups, additional results for non-linear problems, new design codes...); (4) A set of tools exist for users to easily extract data from ROBOT Millennium, such as member data, nodal data, forces, loads etc.
• Leap Building Software Suite - (1) Presto - precast & prestressed concrete beam analysis and design. (2) Axsys - precast multistory column and wall panel analysis and design, (3) PC-Help -precast connection design aid.
• MasterSeries - Integrated software suite for structural analysis, design, drafting and detailing. Includes the following program groups: MasterFrame (space frame analysis); MasterPort (portal frame analysis and design); MasterBeam (steel, concrete, composite, and timber beam analysis and design); MasterKey (design of steel, concrete, masonry, and timber elements; design of steel connections; wind analysis); MasterCAD (general drafting); MasterRC (CAD for concrete detailing); and MasterSteel (CAD for steel detailing).
• Oasys Geotechnical Software Suite - (1) Alp - Laterally loaded pile analysis. (2) Frew, Stawal, Greta - Retaining Walls. (3) Slope, Vdisp, Tunset - Soil Movement Software. (4) Safe - Soil Structure Interaction.
• Oasys Structural Software Suite - (1) GSA - Frame and finite element analysis. Steel member and reinforced concrete design. (2) ADC - Analysis and design of reinforced concrete elements. (3) AdSec - Analysis of general concrete sections for serviceability and ultimate limit states. (4) Compos - Analysis and design of simply-supported composite concrete and steel beams.
• Risa Software Suite - Structural analysis and design software suite includes: (1) RISA-2D - Simple 2D Structural Engineering Software for Analysis & Design of continuous beams, 2D trusses, and 2D frames. (2) RISA-3D - 3D Structural Engineering Analysis & Design Software for general frame, truss, and plate/shell structures. (3) RISAMasonry - Masonry Design and Analysis. (4) RISATower - Tower Analysis and Design. (5) RISAFloor - Structural Engineering Software for Buildings. (6) RISAFoot - Biaxial Analysis and Design of spread footings to get bearing pressures and reinforcing steel. (7) RISABase - ccurate Biaxial Analysis & Design Software of steel base plates and anchor bolts. (8) RISASection - Design Software for shape calculations for any combination of standard or built-up shapes.
• SAFI Software Suite - Structural Analysis Software Suite includes: (1) Steel Calculator (2) Concrete Calculator (3) SAFI 2D (4) SAFI 3D (5) SAFI Steel (6) SAFI Concrete (7) SAFI Bridge (8) SAFI Steel-Wood Bridge (9) SAFI Pretension (10) SAFI Tower (11) SAFI Tubular