SEGAN

SEGAN

Overview

If this is the main page for the program, also cut and paste the following:

Software Databox
Software Name:	SEGAN
Description:	Legacy software from 1978 for the analysis of curved segmentally erected prestressed concrete box girder bridges, including time dependent effects, so that deflections and stresses can be computed at any stage during the construction or service life of the bridge. Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley. SEGAN: Analysis of Curved Segmentally Erected Prestressed Concrete Box Girder Bridges Van Zyl, Stefanus F. Department of Civil Engineering, University of California, Berkeley, 1978, This program permits the analysis of curved segmentally erected prestressed concrete box girder bridges, including time dependent effects, so that deflections and stresses can be computed at any stage during the construction or service life of the bridge. The segments can be either precast or cast in place. The bridge cross section must consist of a single box section with vertical or inclined webs and have cantilever flanges. Width and depth dimensions can vary along the bridge span. Time-dependent material changes, such as creep and shrinkage of concrete, as well as environmental effects such as humidity and temperature changes, are accounted for. However, other concrete material nonlinearities such as cracking or inelastic behavior and geometric nonlinearities are not included in the analysis. Prestressing in the longitudinal direction can be included in the analysis. Tendons can be located in either the webs or flanges and can have a linear or parabolic profile. Stressing and release operations, slip in of tendons, and restressing and removal of tendons are included. A procedure is included for specifying the structural configuration and the erection sequence. Operations used in segmental construction, such as addition of segments, prestressing, changing of support boundary conditions, application or removal of construction loads, and prescribed displacements can be analysed. At each construction stage, the current structure is analyzed and the incremental and total displacements, stresses, and strains are obtained. The complete structure can also be analyzed for a variety of live loads and time steps.
Category:	Bridge Design, Incrementally Constructed Bridges
License Type:	Freeware
Price:	Free
Keywords:	concrete; creep; segmental bridge; shrinkage
Data formats:
Design code:
Languages:	English
URL:	http://nisee.berkeley.edu/elibrary/Software/SEGANZIP
Creator:
Distributor:	National Information Service for Earthquake Engineering
(This databox is based on SEGAN entry at BridgeArt.net software database.)